Gigabyte XP-M8VM800 User Manual page 32

4 . Then you will see a menu for you to select the RAID type (Figure 6). Use arrow keys
to select RAID 0 for performance and press <Enter>.
Auto Setup For Performance
www.DataSheet4U.com
Array Mode RAID 0 (Striping)
RAID 0 for performance
Select Disk Drives
RAID 1 for data protection
Block Size 64K
RAID SPAN for capacity
Start Create Process
Channel Drive Name
Serial_Ch0 Master ST3120026AS
Serial_Ch1 Master ST3120026AS
4 - 1 Auto Setup: After selecting the RAID type, you have to decide whether you want the
RAID array to be created manually or automatically. The steps below introduce how to
autocreate the RAID 0 array.
automatically. To manually setup RAID 0, please proceed to Step 4-2 on Page 31.
4-1-1. Select Auto Setup For Performance and press <Enter>.
4-1-2. When the Auto create array will destroy all data on disks, Continue? <Y/
N > message (Figure 7) appears, press <Y> to confirm or <N> to quit.
Auto Setup For Performance
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
Auto create array will destroy all
data on disks, Continue? <Y/N>
Channel Drive Name
Serial_Ch0 Master ST3120026AS
Serial_Ch1 Master ST3120026AS
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1
Enter : Confirm the selection
ESC
Array Name
Figure 6
Auto Setup selects the disks drives and creates array
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1
Enter : Confirm the selection
ESC
Array Name
Figure 7
: View Array/disk Status
, : Move to next item
: Exit
Mode Size(GB)
SATA 111.79
SATA 111.79
: View Array/disk Status
, : Move to next item
: Exit
Mode Size(GB)
SATA 111.79
SATA 111.79
Status
Hdd
Hdd
Status
Hdd
Hdd
3 2