Lennox VESZC1 Owner's Manual page 23

When the icons and texts turn bule indicating the schedule is open.
When the icons and texts turn grey indicating the schedule is closed.
When schedule is open, centralized controller will send out the control order
automatically according to the time and parameters set by the schedule.
(2) Edit schedule
Press to enter the page of schedule editing.
Press to save the schedule setting.
1) Setting method of schedule control parameters is the same with that of the
single indoor unit control.
2) Add equipment
Press the "Add Unit" button to enter the page of equipment selection. User may set
the indoor unit that works according to the current schedule.
Note: For a same indoor unit, different schedules can be set at the same time. In
this case, unit will work according to the schedule setting that is previously energized.
3) Repeat schedule
Press "Repeat Setting" button to enter the setting page. User can set the schedule
work repeatedly according to weeks.
4) Time setting
Press the "ON Time" or "OFF Time" button to enter the page of time setting.
User can set the time for unit to turn on/off automatically.
Note: The time to activate or stop unit can be set at the same time, but they must
not be the same.
5) Add exception
Press the "Exception Setting" button to enter the setting page of schedule
exception.
The calendar will pop in, user can select the date to activate or cancel exception.
Press to save the selected date.
Notes: When schedule exception has been set, air conditioner will not execute the
control order on the exception date set by the schedule.
User may add several exception dates.
(3) Add schedule
Press to add new schedules. Then the schedule editing page will pop in for
Multi-VRF Centralized Controller Operation Manual
20