Single Unit Control - Lennox VESZC1 Owner's Manual

Multi-VRF Centralized Controller Operation Manual
No. Name
⑸
Error status
⑹
Operation mode
⑺
Shield status
⑻
IDU Sort
⑼
All Off button
Right page
⑽
button
⑾
Current page
⑿
Left page button
⒀
All On button
⒁
IDU icon
⒂
IDU name
Press the
Select one indoor unit , press the left or right button at the bottom of the screen to
switch the display of the indoor units.

3.3 Single Unit Control

On the indoor unit control page or group page, press the icon of indoor unit to enter
the single unit control.
Press the icon of indoor unit for 5 seconds to pop up the name set of the selected
indoor unit.
Parameters of single unit control include parameters of general control and
advanced control.
3.3.1 General Control Parameters
Error icon will be displayed if indoor unit is malfunctioning.
When indoor unit is on, the current operation mode will be
displayed:
Auto
Heating
heating
This icon will be displayed when indoor unit is in shield status.
Press the button to enter into the idu sort page.
Press this button to turn off all air conditioning equipment.
Press this button to show the next page idu list.
The total pages of the controlled indoor unit and the current
page.
Press this button to show the previous page idu list.
Press this button to turn on all air conditioning equipment.
Display the icon of the indoor unit.
Display the name of the indoor unit.
button to enter the IDU sort page.
Instructions
Cooling Dry
Floor heating
13
Fan
Space heating 3D