Taking Control; Auto Programs; 3D Massage; Mymassage Memory - Infinity EVOLUTION 3D/4D User Manual

Taking Control

Auto Programs

When massage chair is operating, press the
AUTO button on the remote control to enter
Auto Program Menu. Choose from Sports
Refresh, Extension, Rest & Sleep, Working
Relief, Neck & Shoulder, Waist & Spine,
MyMassage 1, or MyMassage 2. Press OK
to enter the program you desire. Selected
program will show on the home screen.

3D Massage

As well as the programs in the AUTO section,
there are 3 additional 3D Massage programs. To
access, select 3D MASSAGE from Home display,
navigate to MODE and then choose from Deep
shiatsu, Healthy Breath, or Massage Extend.
Press OK to enter the program you desire.
Selected program will show on the home screen.
To adjust the intensity or region of your 3D
Massage, press up or down button to navigate
among: FORCE and PART.

MyMassage Memory

Your chair has the ability to save your favorite
customized massage programs to memory. To
do this, create a manual massage program
(see page 18 for instructions) with all of your
desired air, heat, speed, and intensity settings.
Storing a memory program:
After creating your custom massage in manual
mode, select AUTO from the Home display and
scroll to the bottom of the page. Here you will
see MyMassage 1 and MyMassage 2. Press OK
button to select either 1 or 2 then select "Save".
If you save over the top of an existing memory
program, the existing program will be erased
and replaced by the most recent save.
Loading a memory program
Select AUTO from Home display and
scroll to the bottom of the page. Select
MyMassage 1 or MyMassage 2 and then
select "Run". The chair will now run the
program you created.
10
MyMassage 1