Audio Set-Up Guide Table of Contents Warnings..............................2 Bluetooth Wireless Set-Up (in.stream)..................4 Using in.stream with in.k1000 Topside...................5 Using in.stream with in.k806 Topside..................6 Bluetooth Wireless Set-Up: Using Bluetooth with Smart Touch WaterProof Display..........7 NOTE: AUDIO SYSTEM NOT AVAILABLE ON ALL SPAS...
Audio Set-Up Guide WARNINGS: CAUTION: Audio/Cell Phone/Portable Electronic Devices. Many consumers own some form of portable electronic device, and some spas come equipped with systems designed to interface with these devices. It is important to protect a spa’s audio equipment and your portable electronics by following a few simple procedures: - Always turn the volume down on your portable electronic device before connecting it to the spa audio system.
Page 5
Audio Set-Up Guide WARNINGS: - When the power supply connections or power supply cord(s) are damaged; if water is entering the audio/video compartment or any electrical equipment compartment area; if the protective shields or barriers are showing signs of deterioration; or if there are signs of other potential damage to the unit, turn off the unit and refer servicing to a qualified ser- vice personnel.
2. Turn on Bluetooth on your device. 3. If you see “Gecko in.stream” or “in.stream” from the list of available devices, please reference the below instructions: - Choose “Gecko in.stream” or “in.stream” from the list of available devices - When prompted, enter 5555 as the password - Your device should now be paired with the in.stream audio system...
Audio Set-Up Guide Using in.Stream with in.k1000 Topside Note: in.stream operates without a topside on some spa models. This menu is available only if the in.stream was selected in the audio configuration menu. Turning power On/Off Changing tracks Go to ON/OFF Sub Menu to turn the Use the Last Track and Next Track keys to in.stream on or off.
Audio Set-Up Guide Using in.Stream with in.k806 Topside Note: in.stream operates without a topside on some spa models. Press the Mode key to access the audio controls. Selecting the source – Press the Bluetooth key to select a device using Bluetooth wireless technology.
Audio Set-Up Guide BLUETOOTH WIRELESS SET-UP: Using Bluetooth with Smart Touch WaterProof Display Stereo Sync Operation: Please select the Main Menu on your Smart Touch Control. Make sure the A/V Option is available. Please press the A/V option on the display. Powering Up: Press POWER to power on the integrated amplifier/Bluetooth receiver.
Need help?
Do you have a question about the in.k1000 and is the answer not in the manual?
Questions and answers