Operating The Weather Station, Basic Functions; A) Performing A Dcf Reception Test; B) Searching For Sensors - Conrad TE827NL Operating Instructions Manual

11. Operating the weather station, basic functions

a) Performing a DCF reception test

If the weather station has not detected a DCF signal, you can also start a manual reception attempt for the DCF signal.
To do so, keep the button " " (7) depressed until the DCF radio tower symbol starts to blink (see chapter 9. d).
Check whether the radio tower icon indicates a good reception and wait some minutes until the right time is displayed.
Otherwise select a better location for the weather station and start the reception attempt again.

b) Searching for sensors

If only lines appear in a display field (e.g. for the rain sensor: "- - - . -"), you can start a manual search for all outdoor
sensors.
For this purpose, keep the button " " (6) depressed until the symbol for the radio reception of the outdoor sensors
blinks on the top of the display.
The sensor search may take a few minutes.
If one of the sensors is not found, check its batteries, place the sensor in a different location and reduce the distance
between the weather station and the sensor.
65