Frequently Asked Questions; How Can I Switch Between User And Installer Screens; How Can I Check The Speed Of The Network Card - Fancom WEBLINKBOX Installation Manual

7.

Frequently Asked Questions

7.1

How can I switch between user and installer screens?

When you are logged in as installer it is possible to switch between user screens and
installer screens on a F2000 controller. Double click on the back button ( ) to go from
installer screens to the user screens. Double click on the upper left soft button ( ) to
go from user screens to the installer screens.
7.2

How can I check the speed of the network card?

If the WebLinkBox is connected directly to the PC ensure the network card is suitable
for a 10Mbit device. Do this by setting the speed of the network card to Auto:
1. Start the PC and go to
2. Double click
3. Right click the network adapter used for the WebLinkBox and choose Properties.
4. Click Configure
5. Select Speed & Duplex
side.
6. Select Auto.
7. Click OK to finish.

Start Control
Network Connections.
and choose tab page Advanced.
at the left side. Now the
panel.
Value option appears on the right
Gndf
g
13