Advertisement
10/19
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1. FEATURES & MODELS
The BORUM Industrial Heavy Duty Support Stand is a reinforced pin style stand with industrial
quality design and support bracing system to sustain heavy loads up to 10,000kg. Adjusts to match
the job with a 720mm minimum lift height and 1190mm maximum lift height!! Featuring Heavy-
Duty Industrial design, these tough support stands are ideal for truck, bus, farm, earthmoving
equipment and fleet vehicle maintenance workshop use.
2. ASSEMBLY INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram below. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact your place of purchase.
3. BEFORE USE
1. Make initial inspection of support stand before each use. DO NOT use if components are bent,
broken or cracked. Ensure all parts move freely.
2. Verify that the product and the application are compatible.
3. Before using this product, thoroughly read this owner's manual and familiarise yourself with the
product and the hazards associated with improper use.
4. Always check the vehicle owners or service manual for location of proper lift and support points.
Made in china to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
10TSS
P a g e
| 3
Advertisement
