Advertisement
10/19
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its safe use and operation, and
have been given permission to use this
Safety glasses must be worn when
operating this equipment
Safety footwear must be worn when
operating this equipment
PRE-OPERATIONAL SAFETY CHECKS
1. The maximum load is 10,000kg. DO NOT exceed this rated capacity.
2. Study, understand, and follow all instructions before operating this device.
3. Retain these instructions for future reference.
4. The equipment described in this manual could be potentially dangerous if improperly or carelessly
operated. For the protection of all persons and equipment, only competently trained operators
who are critically aware of the proper operating procedures, potential dangers, and specific
application of this equipment should be allowed to use this equipment at any time.
5. Because of potential hazards associated with this type of equipment, no alterations shall be made
to this product.
6. Failure to heed all warnings contained in this manual may result in personal injury and/or property
damage.
7. All warranties applicable to this equipment are contingent on strict adherence to the operation
and maintenance procedures in this manual.
OPERATIONAL SAFETY CHECKS
1. Do not exceed rated capacity. Overloading can cause damage to or failure of the stand.
2. Use stands on hard level surface capable of sustaining the load.
3. Use on other than hard level surfaces may result in possible loss of load.
4. Centre load on saddle
5. Use as a matched pair.
6. This stand is not to be used to simultaneously support both ends of a vehicle.
7. Support only on the areas of a vehicle as specified by the vehicle manufacturer.
8. Only use attachments and/or adaptors supplied by the manufacturer.
9. Use wheel chocks and/or other blocking device on opposing wheels before using this support
stand.
10. Do not use if damaged in any way.
11. Failure to heed all warnings contained in this manual may result in personal injury and/or property
damage.
Made in china to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Long loose hair must be contained when
operating this equipment
Close fitting/protective clothing must be
worn when operating this equipment
10TSS
P a g e
| 2
Advertisement
