Using The Scan Key (For Models That Support Duplex Scanning); Scan To E-Mail (Pc) - Brother DCP-8060 Software User's Manual

Using the Scan key
(For models that support duplex scanning)
If you want to put the document in the ADF and do duplex scan, depending on your document layout you
need to choose 2sided (L)edge or 2sided (S)edge in your process of scanning.
Choose your document layout from following table:
Portrait
Front
Front
Note
• Duplex scan is supported by the MFC-8860DN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.

Scan to E-mail (PC)

When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you
designated on your network. ControlCenter2 will activate the default E-mail application on the designated PC.
You can scan and send a black and white or colour document from the PC as an attachment.
You can change the scan configuration. (See E-mail on page 62.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to E-mail.
Press OK.
If your machine is a MFC-8460N or DCP-8060, go to Step f.
If your machine is a MFC-8860DN, go to Step d.
Back Front
Back Front
Document Layout Table
Landscape
Back
Back
4.
4
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
4
78