Using The Scan Key - Brother DCP-8060 Software User's Manual

Using the Scan key

Note
• If you use the Scan key on a network, see Using the Scan key on page 152.
• The Scan key features are not supported in Mac OS
You can use (Scan) on the control panel to scan documents into your word processing, graphics or
E-mail applications or a folder on your Macintosh
the mouse clicks needed to scan from your Macintosh
Before you can use
connect the machine to your Macintosh
the correct drivers and the ControlCenter2 are installed. Scanning by
configuration on the Device Button tab of the ControlCenter2. (See SCAN on page 136.) For details about
how to configure the scan settings of the ControlCenter2 buttons and to launch the application of your choice
using (Scan), see SCAN on page 136.
Note
If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout.
Choose your document layout from following table:
Portrait
Front
Front
Note
• Duplex scan is supported by the MFC-8860DN only.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
®
. The advantage of using
(Scan) on the control panel, you have to install the Brother MFL-Pro suite and
®
. If you installed the MFL-Pro Suite from the included CD-ROM then
Back Front
Back Front
Document Layout Table
®
9.1 to 9.2.
®
.
Landscape
Back
Back
(Scan) is that you avoid
(Scan) follows the
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
8.
8
128