Adjusting Contrast; Out Of Memory Message - Brother DCP-7010 User Manual

Chapter 3

Adjusting contrast

You can change the contrast to help an image
look sharper and more vivid.
1
Press Menu and
2.Copy .
Press Set.
2
Press or to select 2.Contrast .
Copy
2.Contrast
Press Set.
3
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press Set.
4
Press Stop/Exit.
3 - 8
or to select
Out of Memory
message
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
For DCP-7025:
If the Out of Memory message appears
when you are scanning the first page of your
document, press Stop/Exit and wait until the
other operations in process finish and then try
again.
If you were scanning subsequent pages,
press Stop/Exit to cancel or Start to copy the
scanned pages.
For DCP-7010:
If the Out of Memory message appears,
press Stop/Exit and wait until the other
operations in process finish and then try
again.