Setting The Beeper Volume; Toner Save - Brother DCP-7010 User Manual

Setting the Beeper Volume

You can change the beeper volume. The
default setting is Med . When the beeper is on,
the machine will beep when you press a key
or make a mistake.
1
Press Menu and
1.General Setup .
Press Set.
2
Press or
General Setup
3.Beeper
Press Set.
3
Press or
High or Off .
Press Set.
4
Press Stop/Exit.
or to select
to select 3.Beeper .
to select Low , Med ,

Toner Save

You can conserve toner using this feature.
When you set Toner Save to On , print
appears lighter. The default setting is Off .
1
Press Menu and
1.General Setup .
Press Set.
2
Press or
General Setup
4.Ecology
Press Set.
3
Press or
1.Toner Save .
Press Set.
4
Press or
Press Set.
5
Press Stop/Exit.
Getting started
or to select
to select 4.Ecology .
to select
to select On (or Off ).
2 - 2
2