Advertisement
Procedure:
1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the
".scd" file onto the USB storage device.
2. Start the vehicle engine.
3. Connect the USB storage device to the USB input on your unit.
4. If AV Source is On, Press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF.
And If Pioneer Smart Sync is connected, disconnect.
5. Press and hold Application launch to display the Initial menu.
6. Press > repeatedly to select "UPDATE", then press Application launch to confirm.
7. Select the "START" item for updating the unit to the lastest software.
8. The "CHK FILE" screen appears.
-> If it shows "ERROR" on the display, Try the following
"FILE ERR->CHK USB" Confirm the software is correct, then restart Version up or change a new USB
memory.
Advertisement
