Optoelectronics M1 User Manual page 10

Operating Modes (cont.)
Recall Mode
To enter recall mode press the MODE button until "Recall" is displayed on the LCD. The first memo-
ry location, (00), will be displayed along with the frequency logged to that memory. To scroll forward
through the frequencies in memory press the RANGE button. The next frequency in memory will be
displayed, up to 99. To scroll backward through the frequencies in memory press the GATE button.
Pressing and holding down either the RANGE button or GATE button will rapidly advance the memo-
ry location in the respective directions. Note: It is possible to scroll continuously in either direction.
Clear Memory
To clear the frequencies in memory press and hold down the mode button when turning power on.
9