Advertisement
BT Pairing (first time)
1. Follow 'Powering On' directions from step 1 to 3.
2. Locate your Bluetooth settings menu on your device and make sure it is on. Search for your specific
'Hydra Speaker'.
3. Once located select the Hydra Speaker and auto pairing should occur. If prompted for a password,
input "0000".
4. If successfully paired the Hydra speaker will make an audible sound and the LED next to the Power
On/Off button (8) will remain solid.
BT Unpairing
1. Locate your Bluetooth settings menu on your device and search for 'Hydra speaker'.
2. Locate the settings or information setting within your paired device and select "unpair or forget this
device".
4. The Hydra Speaker will make an audible sound to indicate it has unpaired and will resume pairing
mode with the LED next to the Power On/Off button flashing 1 second On/Off
TWS Pairing (first time)
1. Two of the same model Hydra speakers are required for this function.
2. Make sure to unpair your device/s from the Hydra speakers.
3. Power on both Hydra speakers (8) simultaneously.
4. Double press the TWS Pair button (3) simultaneously on each Hydra device to activate the TWS
on
pairing function
both units.
5. The Hydra speakers will both call out 'Left Channel' & 'Right Channel' to indicate the pairing sequence
is complete so you can quickly determine which speaker is for which side.
6. Follow the BT pairing steps 1-4 to pair with your device.
7. Normal operation can now commence in true stereo sound!
Volume Up & Down
1. Locate Volume Up/Skip Forward or Volume Down/Skip Back button (2 or 7) on the top of the Hydra
speaker.
2. Press your preferred button as many times as needed to either increase or decrease the Hydra
speaker volume to the setting you desire.
Skip Forward & Back
1. Locate Volume Up/Skip Forward or Volume Down/Skip Back button (2 or 7) on the top of the Hydra
speaker.
2. Long press your preferred button to either skip forward or back to the next tune.
Taking an Incoming Call
1. Locate 'Play/Pause' button (5) on the top of the Hydra speaker.
2. Press the 'Play/Pause' button (5) once.
Rejecting an Incoming Call
1. Locate 'Play/Pause' button (5) on the top of the Hydra speaker.
2. Long press the 'Play/Pause' button (5) until the call is dismissed on your paired device.
www.3sixtgear.com
or visit www.3sixtgear.com/support
3
Advertisement
