Wickes PDI710LD.1 Manual page 10

5. CHANGING ROTATIONAL DIRECTION (See Fig. E)
To change the rotational direction, push the forward/
reverse selector switch (4) to the right position (as
viewed from the front of the drill). The rotation will now
be forward rotation.
REVERSE FORWARD
Push the forward/reverse selector switch (4) to the left
position. The rotation will be backward rotation.
NOTE: Never move the forward/reverse selector switch (4)
while the drill in operation or the on/off switch is locked as
this will damage the drill.
Fig. E
6. DRILL/IMPACT ACTION SWITCH (See Fig. F)
When drilling masonry and concrete, choose the hammer
position " ". When drilling in wood, metal and plastic,
choose the drill position " ".
Fig. F
10