Page 1
Assembly instructions, maintenance and safety information Triclimb Pwt...
Page 2
CARE INSTRUCTIONS Caring for your Triclimb Pwt is not only essential for ensuring safety, but will also add years to its life for your children to play on and enjoy it as they grow.
Page 3
*Children must be supervised at all times while using the Triclimb. *No running, pushing or fighting. *Only use the Triclimb for its intended purpose. For indoor use only, in a domestic setting. *Tip over hazard - Place play-frame on a level surface.
Page 4
Insert rungs into recessed holes on one side. Lay out the leg assemblies and four of the rungs Insert roughly as above. Place the legs with the larger flat head screws (C) and tighten using the hex key holes facing inwards. provided.
Page 5
C x 4 CHECK POINT What to do if your Triclimb still does not sit flat on the ground? You will need a book (or something similar) about 40mm thick to act at a raiser. 1) Open the Triclimb frame and insert the thumb screws.
Page 6
OPENING AND CLOSING Your Triclimb includes two thumb screws that are designed to lock the product in an open or closed position. To open the Tri Climb: 1) Fully unscrew and remove both thumb screws from the sides of the unit 2) Holding the unit at the bottom edges, carefully open the unit.
Need help?
Do you have a question about the Pwt and is the answer not in the manual?
Questions and answers