Page 2
Briefing Book Content m!ka Mic Arm m!ka Mic Arm TV m!ka PopShield Thank you for choosing Yellowtec products. m!ka CamStud m!ka Pole Desktop Mounting Kit m!ka Wall Mount Pole Enjoy m!ka, the most exciting support system m!ka Pole Table Clamp for microphones and monitors.
Page 3
m!ka Mic Arm On Air m!ka Mic Arm Audio Shield RED = High Audio Shield RED = High BLU = Low BLU = Low N/C N/C Cut Off ! Audio Shield Audio Shield RED = High RED = High 5/8“ 5/8“...
Page 4
m!ka Mic Arm m!ka Mic Arm Remarks Remarks...
Page 5
m!ka Mic Arm TV On Air m!ka Mic Arm TV On Air Remarks Audio Shield RED = High Microphone BLU = Low Cut Off ! Audio Shield RED = High Microphone BLU = Low For RED light connect BLK = 0 V YEL = +12-24VDC For WHITE light connect BLK = LED Indicator BLK = +12-24VDC YEL = 0 V...
Page 6
m!ka Mic Arm TV m!ka Mic Arm TV Audio Shield RED = High Microphone BLU = Low RED = High Microphone BLU = Low Audio Shield Remarks...
Page 23
Page 6 - To mount your m!ka CamStud to a m!ka System Pole or litt Riser, choose the included - Make sure the bolt at the bottom of your m!ka Mic Arm has its black plastic sleeve M14 adapter. on. The sleeve is needed to fit the arm smoothly to the various mounting devices.
Page 24
- Use the knurled screws at the rotating joints to adjust the retardation of the joints. - (1) Use the 4 hex screws to mount the adapter to your monitor via VESA 100. - (2) Use the 4 cross screws to attach the adapter to a m!ka Mic Arm via VESA 100.
Page 25
m!ka Remarks Page 32 - In order to hold the tablet properly, its size needs to be min 160mm and max 300mm. - The total weight of the m!ka Twin Monitor Mount and the weight of your two - Tablets will fit at both landscape and upright orientation. monitors has to meet the maximum load capacity of your m!ka Monitor Arm.