Apple Carplay - Skoda ENYAQ iV 2020 Owner's Manual

138 SmartLink ›

Apple CarPlay

✓ Connect the mobile device for the first time with the vehicle
stationary.
Settings
Connection by USB
›
Turn on the Infotainment.
›
Switch on the mobile device.
›
Connect the mobile device to the USB input using a cable .
›
Select connection via Android Auto.
<eigenname translate="no">Apple CarPlay</eigenname>
Connect via Wi-Fi from Infotainment from
›
Mobile devices .
›
Select the desired device from the list of available devices.
›
Select the Bluetooth® Freisprechprofil.
›
Confirm the PIN; enter it if necessary and then confirm.
›
If another device is connected to the Infotainment, select the
device to be replaced.
›
From the list of known devices, select the desired device with
the symbol.
Android Auto - Connect via Wi-Fi from mobile devices
To establish a connection, the following conditions must be met:
✓ The minimum Android version is 5.
✓ No other mobile device can be connected via SmartLink.
✓ Wi-Fi and Bluetooth® functionality is switched on in the Info-
tainment system.
›
Find available Bluetooth® devices on the phone.
›
Select the Infotainment Bluetooth® unit.
›
If necessary, confirm the PIN.
›
In the Infotainment screen, select the connection type Android
Auto.
Disconnecting
›
In the menu Android Auto
›
Tap on .
Apple CarPlay
Connection overview
›
In the SmartLink menu, tap on .
›
Select the connected device.
›
Select the connection type .
List of available applications
A
Depending on the duration of operation:
B
Tap: Return to the menu Apple CarPlay
▶
Hold: Turn on voice control (Siri)
▶
tap "Exit".