Table of Contents
Advertisement
Disconnection of the active connection
Settings of the SmartLink menu
Connection set-up
Connect the external device to the USB port using a connecting cable
▶
» page
76.
▶
In the main SmartLink menu, select the type of communication system
» Fig. 178
or the connected external device
Disconnection of the active connection
To end the connection, go to the main SmartLink menu and tap on the func-
▶
tion surface .
or: Disconnect the cable from the USB port.
▶
If the connection was ended by tapping on the function surface , then it is
necessary to establish the connection again when the external device is con-
nected again.
Android Auto
Introduction to the subject
The Android Auto connection can be set up under the following conditions.
The ignition is switched on.
Infotainment is switched on.
The external device to be connected is switched on.
Some applications require the data connection in the connected external de-
vice to be switched on.
If the Infotainment system is connected to an external device via Android Auto
then all the telephones currently connected, as well as the Bluetooth
will be disconnected.
The external device to be connected will automatically establish a telephone
®
connection via Bluetooth
as a main phone.
It is not possible to connect an additional telephone for the duration of the
connection.
An external device connected using Android Auto cannot be used as an audio
source in the Media menu.
» page 114
» Fig.
178.
B
®
If route guidance is taking place at this moment in the Infotainment system,
then there is the option to start the route guidance in the Android Auto appli-
cation. This also applies reciprocally.
A list external of devices, supported regions and applications that the Android
Auto connection supports can be found on the websites of Google Inc.. Func-
tionality is not guaranteed outside of the supported regions.
A
Main menu
Main menu - function surfaces and information in area
Navigation applications
Telephone applications
Overview of running applications, telephone calls, accepted text messag-
es, tasks in the working directory, weather or similar.
Music applications
Display of other available applications as well as the option of returning to
the main SmartLink menu
Start the application
▶
Tap on the function surface of the desired application to launch the applica-
players,
tion.
Next to the function surface in area
tapping on this function surface again, a list of new applications is displayed.
Apple CarPlay
Introduction to the subject
The Apple CarPlay connection can be set up under the following conditions.
Fig. 179
Android Auto: main menu
A
, the symbol appears and then, after
A
SmartLink+
149
Advertisement
Table of Contents
