Graco 4EVER 4-IN-1 CAR SEAT Instruction Manual page 36

5. Place Car Seat Rear-Facing in Back
Seat of the Vehicle
Place rear-facing in vehicle seat and
center the car seat between the lower UAS
anchors. The base should sit as flat as
possible on the vehicle seat.
6. Extend the UAS Strap.
For easier installation, extend the UAS strap
to its maximum length by pressing the grey
button and pulling on the strap.
7. Check the Level Indicator
Vehicle MUST be on level ground.
Check the level indicator on the car seat.
The bubble must be completely within
the blue zone.
Adjust the recline until the bubble is
completely within the blue zone.
36