DeWalt DW7187 Instruction Manual page 2

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY D WALT TOOL, CALL US TOLL FREE AT: 1-800-
E
4-D WALT (1-800-433-9258)
E
Safety Instructions for Lasers
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
WARNING: For your own safety, read the tool
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the tool and the accessory. When
servicing this tool, use only identical replacement parts.
SAVE THESE INSTRUCTIONS
WARNING! Laser Radiation Exposure. Do not disassem-
ble or modify the laser. There are no user serviceable parts
inside. Serious eye injury could result.
WARNING: Hazardous Radiation. Use of controls or adjust-
ments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• Do not operate the laser in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Store idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqual-
ified personnel may result in injury. To locate your nearest
D WALT service center call 1-800-4-DEWALT (1-800-433-
E
9258) or go to http://www.dewalt.com on the Internet.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause any-
one to intentionally or unintentionally stare into the laser
beam. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
• Do not disassemble the laser or laser power supply.
There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may
result in Hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. Removing labels
increases the risk of exposure to radiation.
• Use Miter Saw Laser System only with specifically
designated D WALT Miter Saws. Use of Miter Saw Laser
E
System on non-designated tools may create a risk of injury.
• Use Laser part # 623020-00 only with Laser Power Supply
part # 618212-00. Use of Laser with another laser power
supply may create injury.
• Use Laser Power Supply part # 618212-00 only with Laser
part # 623020-00. Use of Laser with another laser power
supply may create injury.
CAUTION: Use of controls or adjustments or perform-
ance of procedures other than those specified herein may
result in Hazardous Radiation Exposure.
• The label on your tool may include the following symbols.
V ..................volts
......Laser warning
....................symbol
II ..................Class II Laser
................alternating current
W..................watts
1
mW ........milliwatts
nm ..........wavelength in
..............nanometers
IIIa ..........Class IIIa Laser
........direct current
Hz ..........hertz