Table of Contents
Advertisement
Maintenance
Maintenance instructions
All chainsaw service, other than items listed here in your user manual maintenance instructions,
should be performed by a professional.
PREVENTIVE MAINTENANCE
A good preventive maintenance program of regular inspection and care will increase life and improve
performance of your chainsaw. This maintenance checklist is a guide for such a program.
Cleaning, adjustment, and parts replacement may be required, under certain conditions, at more
frequent intervals than those indicated.
MAINTENANCE CHECKLIST
ITEM
Screws/Nuts/Bolts Inspect/Tighten
Air Filter
Fuel Filter/Oil Filter Replace
Spark Plug
Spark Arrester
Screen
Fuel Hoses
Chain brake
components
Saw chain tension Inspect/Adjust
AIR FILTER
CAUTION: Never operate saw without the air lter. Dust and dirt will be drawn into engine and
damage it. Keep the air lter clean!
TO CLEAN AIR FILTER:
1.
Remove knob (A) holding air lter cover in place, remove the top cover (B) by loosening the cover
retaining screws. Cover will lift off. (Fig.15A)
2.
Lift the air lter (C) out of air-box (D) (Fig.15B).
3.
Clean air lter. Wash lter in clean, warm, soapy water. Rinse in clear, cool water. Air dry
completely.
NOTE:
It is advisable to have a supply of spare lters.
4.
Install air lter. Install engine / air lter cover. Make sure (E) latch (F) and cover t properly. Tighten
the cover retaining knob securely. (Fig.15C &
WARNING: Never perform maintenance when the engine is hot, to avoid any chance of burning
hands or ngers.
16
17
Fig. 15A
ACTION
Clean or Replace
Clean/Adjust/Replace
Inspect
Replace as Required
Inspect
Replace as Required
Inspect
Replace as Required
17
C
D
C
D
Fig. 15B
Customer Helpline
HOURS OF OPERATION
EACH USE
10
E
F
Fig.15D)
16
E
Fig. 15C
0844 801 3652
20
16
F
F
Fig. 15D
15
Hide quick links:
Advertisement
Table of Contents
