Final Sound F100I Loudspeakers - Final F100i User Manual

4. Final Sound F100i loudspeakers

How to unpack the Final Sound F100i virtual surround/stereo system
The Final Sound Model F100i virtual surround/stereo system consists of three separate packaging
units. The Model F100i flat-panel loudspeakers, the Final Sound FVSS201/p receiver and the Final
Sound subwoofer.
The Model F100i stereo flat-panel carton contains:
Two Model F100i flat-panel loudspeakers (left and right)
-
This manual
-
Not included:
wall mounts (optional)
floor stands (optional)
The FVSS201/p receiver carton also contains the power cables for connecting the F100i
loudspeakers.
We recommend using the Final Sound S95 subwoofer. For large rooms it´s also possible to apply one
of the other available Final Sound subwoofers or to add an additional S95.
Each individual component is packed in its own carton. The easiest way to unpack is to open the
upper side of the box (check the labels), take out the separate units and carefully remove the cartons
and plastic bags. Take care to avoid putting pressure on the black loudspeaker's stator plates.
If your packaging is not complete, do not operate the system but contact your dealer.
We recommend you to save all packaging materials for possible later use.
If any unit appears to be damaged when unpacking, do not operate the damaged unit. Repack the unit
in its original carton and notify your authorized Final Sound dealer immediately.
Assembling Model 100i
The F100i can be wall mounted or floor standing. Your Final Sound dealer can provide
optional floor stands or the optional wall mount kit.
100i
FINAL SOUND Loudspeaker Manual vs. 2.0 -US-
.
c FS 2008 6