Final F100i User Manual page 12

power output terminal. It is necessary to provide power to the flat-panel loudspeakers otherwise they
won't function. The F100i flat-panel loudspeakers are designed to switch off when signals are not
received within 20 minutes. Please disconnect your F100i - FVSS201/p - subwoofer system from the
mains during thunderstorms and when not be in use for a long time. Don't forget to disconnect all
additional equipment (video screen e.g.) connected to the FVSS201/p receiver also from the mains.
The flat-panel loudspeakers are equipped with loudspeaker terminals, which are suited for spades or
common loudspeaker wires. The red loudspeaker terminal has to be connected to the FVSS201/p´s
red terminal (+) and the black terminal has to be connected to the FVSS201/p´s black terminal (-).
How to clean and maintain the Final Sound F100i loudspeaker panels?
Always unplug the Final Sound flat-panel loudspeakers from the mains and shut off all sound
equipment before you start cleaning.
Dry clothe cleaning
Dry clothe cleaning is a weekly recommendation to wipe off dust. Cleaning on a regular base will
prevent the insides of the panels to collect too much dust. To prevent fire or shock hazard, clean only
with a DRY clothe and prevent pushing the black (sound producing) parts of the loudspeaker panels.
Never use cleansers or chemicals or any liquids, which risk dripping into the loudspeaker panels.
Using chemicals can harm the stator´s protective cover. In that case, the panel does not approve to
the safety regulations any more.
Vacuum cleaning
It's important to vacuum clean the panels once in two months. Switch off the panel's power and wait at
least 15 minutes to start cleaning. Use a soft brush and don't apply too much air pressure to the
panels. If the vacuum cleaner is very strong, keep some distance between the vacuum cleaner´s
brush and the panels. Vacuum clean both loudspeaker panels (both the front and back side).
100i
FINAL SOUND Loudspeaker Manual vs. 2.0 -US- c FS 2008 12
.