Advertisement
2.2.17 Removing the gears
(See Figs.37 to 40)
• Prior to performing the following procedure, remove the top
cover, chassis unit, top plate assembly and pickup unit.
• Pull out the loading gear 3. (See Fig.35.)
(1) Pull out the feed gear.
(2) Move the loading plate assembly in the direction of the ar-
row to release the L side plate from the two slots m' of the
chassis rivet assembly. (See Fig.37.)
(3) Detach the loading plate assembly upward from the chas-
sis rivet assembly while releasing the joint n'. Remove the
slide hook and loading plate spring from the loading plate
assembly.
(4) Pull out the loading gear 2 and remove the change lock le-
ver.
(5) Remove the E ring and washer attaching the change gear
2.
(6) The change gear 2, change gear spring and adjusting
washer come off.
(7) Remove the loading gear 1.
(8) Move the change plate rivet assembly in the direction of the
arrow to release from the three shafts of the chassis rivet
assembly upward. (See Fig.38.)
(9) Detach the loading gear plate rivet assembly from the shaft
of the chassis rivet assembly upward while releasing the
joint p'. (See Figs.38 and 40.)
(10) Pull out the loading gear 4.
Feed gear
Slot m'
L side plate
Loading plate assembly
Joint n'
Slot m'
Chassis rivet assembly
Fig.37
Joint p'
Change plate
rivet assembly
Shafts
E ring
Fig.38
Loading plate assembly
Loading plate spring
Slot m'
Chassis rivet assembly
Fig.39
E ring
Washer
Loading gear 1
Change gear 2
Change gear
spring
Adjusting
washer
Change plate
rivet assembly
Chassis rivet assembly
Fig.40
KD-LH3150, KD-LH3100
Loading gear 4
Loading gear plate
rivet assembly
Shaft
Loading gear 2
Loading gear 1
Chassis rivet assembly
Change gear 2
Joint n'
Slide hook
L side plate
Slot m'
Loading gear 2
Change lock lever
Loading gear 4
Loading gear plate rivet
assembly
(No.49838)1-21
Advertisement
