AEG FSE84717P User Manual page 11

Settings
End sound
Auto door open
Key tones
Latest prog. selec‐
tion
Display on floor
Brightness
Language
Reset settings
PNC number
1) For more details, refer to the information provided in this chapter.
6.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A B
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Values
ON
OFF (default)
ON (default)
OFF
ON (default)
OFF
ON
OFF (default)
ON (default)
OFF
From level 0 to level
9
List of languages
(default: English)
YES
NO
Number
C
Description
Activate or deactivate the acoustic signal for
the end of a programme.
Activate or deactivate AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
Enable or disable the automatic selection of
the most recently used programme and op‐
1)
tions.
Activate or deactivate TimeBeam.
Adjust the brightness of the display.
Set the preferred language.
Reset the appliance to the factory settings.
Check the PNC number of your appliance.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
• The lights related to the
Previous, OK and Next are on.
• The display shows the first
available setting and its current
value.
How to change a setting
Make sure the appliance is in setting
mode.
1. Use Previous or Next to select the
desired setting.
ENGLISH 11
1)
1)
1)
1)
and for