Step 1: Getting Ready - Nikon WT-6 User Manual

Step 1: Getting Ready

After starting the computer and logging in, ready the camera and
WT-6 as described below.
1
Insert a memory card.
Turn the camera off and insert a memory
card (do not turn the camera off while
data are being transferred to the
computer). This step can be omitted in
camera control mode (0ii).
2
Attach the WT-6 (04).
3
Turn the camera on.
Rotate the power switch to turn the
camera on.
A
Removing the WT-6
Turn the camera off, remove the WT-6, and replace the peripheral
connector cover.
Power switch
7