Discharge sizes may be reduced to 1-1/2” or the risk of explosion and fire from these flammable gases. 1-1/4”. Consult Liberty Pumps for proper pipe and system sizing. ◼ Wear adequate Personal Protective Equipment when working Pro-Series systems come with an integral control system with on pumps or piping that have been exposed to wastewater.
Discharge sizes may be reduced to 1-1/2” or 1-1/4”. Contact Liberty Pumps with questions regarding proper pipe sizes and flow rates. Discharge: Using an adapter, connect the discharge pipe to the threaded 2” or 3” port provided on the cover.
WA R N ING RISK OF FIRE Liberty Pumps offers both an indoor (Figure 9) and outdoor (Figure 10) version of the controller. ◼ Do not use an extension cord to power the product. Note: The cord ends must be removed in order to wire the Extension cords can overload both the product and outdoor controller.
Pro- RED alarm beacon Series cover. Liberty Pumps sewage pumps utilize a 17.50” long toe nipple for 680XL-Series Basins. Install the pipe into the threaded discharge of the pump.
Liberty Pumps, Inc. shall not be liable for any loss, damage, or expenses resulting from installation or use of its products, or for indirect, incidental, and consequential damages, including costs of removal, reinstallation or transportation.
Need help?
Do you have a question about the Pro680 Series and is the answer not in the manual?
Questions and answers