Operation - HOME ELEMENT HE-TP621 User Manual

Electric thermo-pot
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
7.
Avoid splashes of water on the airpot's body especially on the top portion to prevent electrical shocks. In accidental case of water splashes, wipe it dry immediately.
8.
Do not let cord hang over edge of table or counters, or touch hot surfaces.
9.
Do not operate any appliance with damaged cord or plug or after the appliance malfunction of has been damaged in any manner.
10. In case of damaged mains cord, it must be replaced by a repair shop authorized by the manufacturer.
11. Keep the airpot away from children, handicapped and elderly persons. They should be supervised if they are going to dispense water from the airpot to prevent accidents and burn injuries.
12. Unplug from outlet when not in use and before cleaning. Allow to cool before putting or taking off parts.

OPERATION

Tips and reminders when filling water:
Never fill water in excess. Doing so will cause water overflow when boiling and may damage body while heating water. It may also damage the airpot after a short period of time.
Never fill water directly from a tap water faucet to avoid short-circuit and electrical shock.
Be sure to close the top cover and lock it.
Note: Closing the top cover creates a clicking sound.
Plug it in to the power source. The red indicator lights up to indicate the heating process.
Never open the top cover or fill the airpot with water during boiling. Do not cover the steam vent. When water has boiled, the red indicator turns off and the green indicator lights on signaling the keep warm
state (temperature approximately 98°C).
When dispensing hot water, press the pressure pad with enough force to bring out water from the airpot. Exercise caution and extreme care when dispensing hot water from the airpot to prevent accidents and
burn injuries.
Press the lid opening switch to unlock the lid's top cover and open it.
Pour water into the airpot up to the "MAX" water mark
Close the top cover and lock it. Closing the top cover creates a clicking sound.
Plug it in to the power source. The red indicator lights up to indicate the heating process.
When water has boiled, the red indicator turns off and the green indicator lights on signaling the keep warm state (temperature approximately 98°C).
When dispensing hot water, press the pressure pad with enough force to bring out water from the airpot.
.
7
HE-TP621

Advertisement

Table of Contents
loading

Table of Contents