HANNspree HC322PPB User Manual page 15

SHARPNESS
COLOR SETTING
RED
GREEN
BLUE
USER
LOW BLUE MODE
OSD SETTING
LANGUAGE
H-POSITION
V-POSITION
TIME OUT
TRANSPARENCY
RESET
AUTO CONFIG
AUTO COLOR
RESET
EXTRA
INPUT SELECT
availability of this function depends upon the selected model]
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from 0 to 100.
Adjust the color temperature value of the display according to
your preference: RED / GREEN / BLUE.
Move the cursor to the User option and select it,
1. To adjust the red, enter the「R」option and adjust the level.
2. To adjust the green, enter the「G」option and adjust the level.
3. To adjust the blue, enter the「B」option and adjust the level.
Adjust the「LOW BLUE MODE」according to your needs.
Enter the option and adjust the level.
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language.
the OSD Language depends on the selected model]
Select 「H-POSITION」 option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
Select 「TIME OUT」option to set the OSD time out from 10 to
100 seconds. Enter the option and adjust the level.
Select 「TRANSPARENCY」 option to adjust the transparency of
the OSD. Enter the option and adjust the level.
The auto adjustment function is used to optimize
The auto adjustment function is used to optimize
Select the 「RESET」option to reset to the monitor's default
setting. This will erase the current settings. Enter the option and
select On or Off.
Select the 「INPUT SELECT」option to change between analog
(VGA) or Digital (HDMI / DP) source. Enter the option and
select Analog or Digital.
15
User's Manual
[Reference only,