Download Print this page
Sealey VS8200.V2 Instructions
Sealey VS8200.V2 Instructions

Sealey VS8200.V2 Instructions

Video bore scope

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
DO NOT use the bore scope if dropped and/or damaged
DO NOT operate near live electrical wires.
DO NOT operate near moving parts such as pulleys, motors, gears or fans etc.
DO NOT bend the bore scope shaft tighter than 13cm diameter.
DO NOT insert the bore scope shaft into locations whose temperature is greater
than 55°C.
Maintain the bore scope in good and clean condition for best and safest
performance.
A full range of personal safety equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long
hair.
Account for all tools and parts being used and do not leave any in, or near, the
engine.
Be alert to your surrounding environment while using the bore scope.
Note the location of the object to be inspected and determine a route to it. Bend
the bore scope shaft to follow the route.
2. INTRODUCTION
The incredibly small probe diameters incorporated into this tool make it first choice for
the diesel engine specialist where the tiny probe can be passed through most glow plug
holes in the cylinder head. This makes inspection of the internal bores fast and easy. An
optional side view probe is also available for this tool. The image is displayed on a crisp
clear screen and can be shared using the AV cable supplied.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS8200.V2
Probe ø: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.9mm
Optional Probe (90° Side View) . . . . . . . . . . . . . . . . . . . . . VSBSP39S
Field of Vision: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105°
Pod Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22mm
Probe Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100mm
Adjustable Light Control: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
Screen Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mm
Screen Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320x240
Mirror Flip/Rotate Function: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
Record Function (Video + Still): . . . . . . . . . . . . . . . . . . . . . . . . . . . . No
AV Out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
USB Connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No
SD Memory Slot: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 x AA
4. PREPARATION
4.1.
Batteries
4.1.1. Turn the bore scope over and lift up the ring screw (fig.2A) turn the ring
anti-clockwise until fully unscrewed and pull to lift open the battery door (fig.2B).
4.1.2. Insert AA batteries ensuring correct polarity (fig.2C).
4.1.3. Close the battery door screw in the ring screw clockwise until tight and push
down out of the way (fig.2D).
4.2.
Probe
4.2.1. Pull back the threaded sleeve on the end of the probe and ensure the red dot
on the tab is facing upwards (fig.3A), take the probe and insert it into the top of
the bore scope housing.
The probe will only connect one way.
4.2.2. With the probe pushed firmly in, screw the sleeve onto the housing to secure
it in place (fig.3B).
© Jack Sealey Limited
INSTRUCTIONS FOR:
VIDEO BORE SCOPE 3∙9mm
VS8200.V2
MODEL No:
Original Language Version
fig.1
fig.2
fig.3
VS8200.V2
Issue: 1 - 04/07/14

Advertisement

loading

Subscribe to Our Youtube Channel

Summary of Contents for Sealey VS8200.V2

  • Page 1 Model No: ........VS8200.V2...
  • Page 2 Dispose of batteries according to local authority guidelines. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.