Sealey Auto Service Series Instructions Manual
Sealey Auto Service Series Instructions Manual

Sealey Auto Service Series Instructions Manual

Borescope 8.5mm
Hide thumbs Also See for Auto Service Series:

Advertisement

Quick Links

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: please read tHese iNstrUctioNs careFUllY. Note tHe saFe operatioNal
reQUireMeNts, WarNiNgs aNd caUtioNs. Use tHis prodUct correctlY aNd WitH care For tHe
pUrpose For WHicH it is iNteNded. FailUre to do so MaY caUse daMage aNd/or persoNal
iNJUrY aNd Will iNValidate tHe WarraNtY. please Keep iNstrUctioNs saFe For FUtUre Use.
1.
safety instructions .................................................................................2
1.1. Work Area safety ......................................................................................2
1.2. electrical safety ........................................................................................2
1.3. Personal safety ........................................................................................2
1.4. Battery safety ...........................................................................................2
1.5. operating safety.......................................................................................3
2.
2.1. description................................................................................................4
2.2. Specifications ...........................................................................................4
2.3. Accessories Included ................................................................................5
2.4. tool components and Ports .....................................................................5
2.5. Buttons and controls ................................................................................6
3.
Installation and Connection ..................................................................7
3.1. Battery removal and Installation ..............................................................7
3.2. Imager Head and cable Installation .........................................................8
3.3. Accessories Installation ............................................................................8
3.4. Micro sd card Installation ........................................................................9
3.5. usB cable connection............................................................................. 9
3.6. Video-out cable connection....................................... ....................... 10
4.
operation .................................................................................................10
4.1. Basic operation ........................................................................................10
4.2. Pre-use Inspection ...................................................................................11
4.3. tool and Work Area Preparation ...............................................................11
4.4. Maintenance .............................................................................................12
4.5. on screen navigation ..............................................................................12
4.6. Icons .........................................................................................................19
4.7. software updates .....................................................................................19
5.
troubleshooting .....................................................................................20
declaration of conformity .....................................................................21
Page 1

table of contents

Original Language Version
© Jack sealey limited 2012
InstructIons for:
proscope 1 digital
borescope Ø8.5mm
Vs8220
Model no.
VS8220
Issue: 2(SP) - 23/09/13

Advertisement

Table of Contents
loading

Summary of Contents for Sealey Auto Service Series

  • Page 1: Table Of Contents

    Vs8220 Model no. thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: please read tHese iNstrUctioNs careFUllY. Note tHe saFe operatioNal reQUireMeNts, WarNiNgs aNd caUtioNs.
  • Page 2: Safety Instructions

    1.4.5. Be sure to install the batteries with the correct polarity as indicated in the battery compartment. 1.4.6. dispose of batteries according to local authority guidelines. do Not dispose of batteries in fire. Page 2 © Jack sealey limited 2012...
  • Page 3: Operating Safety

    1.5.12. do Not drop the tool. If the tool is accidently dropped, check for damage. 1.5.13. Always wear appropriate personal protective equipment whilst handling and using the tool. A full range of PPe is available from your sealey dealer. 1.5.14. Protect against excessive heat. the tool should be kept away from heat sources.
  • Page 4: Description, Specifications And Tool Components

    Zoom, low light vision lighting fully adjustable led cable reach 1m (3’) -- expandable to 6m (19’) w/optional extensions Imager Head 8.5mm (0.33”) Waterproof Imager head and cable to 3m (10’) Page 4 © Jack sealey limited 2012...
  • Page 5: Accessories Included

    Imager Head and Cable – connects to the tool to capture images and videos. cable connector – connects the handheld display unit to the imager head and cable. Page 5 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 6: Buttons And Controls

    10) accessory Magnet – Picks up small metal objects. 11) accessory Hook – Unclogs obstacles and picks up wires in confined areas. 12) accessory Mirror – Helps users look around corners and view unreachable areas. 2.5. Buttons and Controls (fig.3) fig.3 Page 6 © Jack sealey limited 2012...
  • Page 7: Installation And Connection

    3.1.1. turn the display unit handle upside down to expose the battery compartment cap and screw. (fig.4) 3.1.2. use a screwdriver to remove screw and slide off the battery compartment cap. Page 7 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 8: Imager Head And Cable Installation

    3.3.1. The three accessories include magnet, hook and mirror (fig.2). All are attached to the imager head in the same manner. Hold the accessory and the imager head as shown in fig.7. Page 8 © Jack sealey limited 2012...
  • Page 9: Micro Sd Card Installation

    3.5.1. use the supplied usB cable to connect the tool to a Pc to upload and view captured photos and videos. A “usB connected” message will appear on the screen as shown (fig.9). Page 9 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 10: Video-Out Cable Connection

    4.1.11. connect the supplied video-out (tV-out) cable to video-out port of the tool and the other end of the cable to the video-in port of a tV to view a high quality real-time image. Page 10 © Jack sealey limited 2012...
  • Page 11: Pre-Use Inspection

    4.3.9. check the temperature of the work area. the working temperature of the tool is between 32°f (0°c) and 113°f (45°c). 4.3.10. check if any moving parts are likely to be experienced in the work area. Page 11 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 12: Maintenance

    4.5.4. Adjusting screen backlighting. Pressing rIGHt and left arrow buttons on the key pad (in the still camera mode) will increase or decrease the screen back lighting. A brightness indicator bar will be displayed on the screen as you adjust brightness (fig.11). Page 12 © Jack sealey limited 2012...
  • Page 13 (fig.13). Pressing BAcK button at any point will take you back to the live screen. fig.13 Page 13 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 14 Note: Before performing the formatting, make sure you have reviewed the recorded files thoroughly. fig.15 4.5.9. Help.This function provides the firmware version information. In the Setup screen, select Help and press OK button, then the firmware version screen will appear (fig.16). Page 14 © Jack sealey limited 2012...
  • Page 15 UP/DOWN button to increase or decrease the number. When finished, press OK button to save configuration and exit, or press BAcK button to exit without saving changes. fig.18 Page 15 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 16 Micro sd card if available. Note: figure at the top left under the camera icon indicates how many photos you can save in the space left. Page 16 © Jack sealey limited 2012...
  • Page 17 Note: before capturing a video, the figure at the top left under the video icon indicates how long a section of video you can save in the space left (fig.23). fig.23 Page 17 Original Language Version VS8220 Issue: 2(SP) - 23/09/13 © Jack sealey limited 2012...
  • Page 18 No to cancel the command and press OK button to exit. When you delete all the photos or videos, a “no files Available” message appears on the screen (fig.27). Note: files or videos can only be deleted one at a time. fig.26 fig.27 Page 18 © Jack sealey limited 2012...
  • Page 19: Icons

    Free updated files are available for the tool. 4.7.1. Format your Micro SD card to FAT file format on a computer. 4.7.2. Visit our website www.sealey.co.uk and download software update file to your Micro sd card.
  • Page 20: Troubleshooting

    Dispose of batteries according to local authority guidelines. under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
  • Page 21: Declaration Of Conformity

    VS8220 Model/Type: ..................................Manufacturing Date / Serial number (optional): ......................... Manufacturer's authorised representative within the EC: Jack Sealey Ltd. Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk, IP32 7AR Conforms to the requirements of the following Directives, as indicated.

This manual is also suitable for:

Proscope 1 digital vs8220

Table of Contents