Table of Contents
Advertisement
ould
tightness to ensure that the product is in safe working condition. Any part
that is damaged should be properly repaired or replaced by an authorised
service centre.
ainst
the
Maintenance schedule
The bar may be reversed to distribute wear for maximum life. The bar should
be cleaned every day of use and checked for wear and damage.
and
Daily check
Bar lubrication
Chain tension
Chain sharpness
pply,
For damaged parts
g or
For loose fasteners
Fuel mixture or fuel and lubricant
(only for petrol-driven power head)
ct to
Clutch engagement (only for petrol-
driven power head) (no chain
movement at idling speed)
tion
Power cable for damage (only for
electric-driven power head)
ocal,
RESIDUAL RISKS
ther
Even when the product is used as prescribed, it is still impossible to completely
ct to
eliminate certain residual risk factors. The following hazards may arise during
are
use, and the operator should pay special attention to avoid the following:
the
■
injury caused by vibration
–
Hold the product by the designated handles, and restrict working
time and exposure.
d to
■
injury caused by exposure to noise
–
Wear hearing protection, and limit exposure.
thin
■
injury from contact with the exposed saw teeth of the chain
■
injury caused by kickback or sudden and unforeseen movement of the
guide bar
■
injury caused by ejected parts of the saw chain
■
injury caused by thrown-off parts of the workpiece (wood chips and
splinters)
arts,
■
injury caused by dust and particles
can
■
injury caused by skin contact with the lubricant or oil
RISK REDUCTION
ould
iced
It has been reported that vibrations from handheld tools may contribute
ginal
to a condition called Raynaud's Syndrome. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent upon exposure
jury,
to cold. Hereditary factors, exposure to cold and dampness, diet, smoking,
hain
and work practices are all thought to contribute to the development of the
e on
symptoms. There are measures that can be taken by the operator to possibly
reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating the product, wear
l of
gloves to keep the hands and wrists warm. It is reported that cold weather
jury.
is a major factor contributing to Raynaud's Syndrome.
any
■
After each period of operation, exercise to increase blood circulation.
■
ther
Take frequent work breaks. Limit the amount of exposure per day.
If you experience any of the symptoms of this condition, immediately
and
discontinue use and see your physician.
WARNING! Injuries may be caused, or aggravated, by prolonged use of a
soft,
tool. When using any tool for prolonged periods, ensure that you take regular
breaks.
oper
Before each use
Before each use and frequently
Before each use, visual check
Before each use
Before each use
Before each use
Before each use
Before each use
KNOW YOUR PRODUCT
See pages 4–5.
■
Oil reservoir cap
■
Bar bolt
■
Chain
■
Bar
■
Branch hook
■
Chain tensioning screw
■
Attachment shaft
SYMBOLS
Safety alert
Read and understand all instructions before operating the
product. Follow all warnings and safety instructions.
Wear eye, ear, and head protection.
Wear non-slip safety footwear when using the product.
Wear non-slip, heavy duty gloves.
Do not expose the product to rain or damp condition.
Electrical hazard, at least 15 m away from the overhead
10m
electric-power lines
106
Guaranteed sound power level
Minimum
Keep hands at least 120 mm away from the chain.
120mm
Beware of thrown or flying objects. Keep all bystanders,
especially children and pets, at least 15 m away from the
operating area.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling
advice.
Regulatory Compliance Mark (RCM). Product meets
applicable regulatory requirements.
27
27
Advertisement
Table of Contents
