Page 2
mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Page 3
REAR HANDLE LOCK TRIGGER FOR TRIGGER ROTATING HANDLE FRONT HANDLE FRONT GUARD BLADES BLADE BATTERY SAFETY TIP OPERATOR PRESENCE SWITCH BLADE COVER...
Page 19
TECHNICAL DATA CORDLESS HEDGE TRIMMER AHT1852B/AHT1852BS6 Rated voltage 18 V DC No load speed 2700 min (SPM) Blade length 550 mm Cutting capacity 26 mm Weight (without battery) 3.0 kg Weight with heaviest battery pack 4.2 kg Noise emission values determined according to EN 60745-1 and EN 60745-2-15 = 78.4 dB(A)
or unplugging the power tool. Keep cord away from heat, oil, Use the power tool, accessories and tool bits etc. in sharp edges or moving parts. Damaged or entangled cords accordance with these instructions, taking into account the increase the risk of electric shock. working conditions and the work to be performed.
all instructions. the pace. Clear the work area before each use. Remove all objects, such Do not attempt to cut stems or twigs that are larger than 10 mm as cords, lights, wires, or strings which can be thrown or become thick, or those obviously too large to feed into the cutting blade.
and then carefully apply a rust preventative lubricant before refitting the blade protector. The manufacturer recommends you to use a Wear eye protection. rust-preventative lubricant spray to apply an even distribution and reduce the risk of personal injury from contact with the blades. For information about suitable spray product, check with an authorised service centre.
Page 24
Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 960087309-02...