AEG HK633220FB User Manual page 25

Automatic Heat Up
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the illustration), and then de-
creases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
display.
2. Immediately touch
on in the display.
3. Immediately touch
the necessary heat setting comes on. After 3
seconds
To stop the function touch
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
vate, touch
Power function of the double ring cooking zone
Power function of the inner ring starts when the appliance senses the cookware with a
smaller diameter than the inner ring. Power function of the outer ring starts when the ap-
pliance senses the cookware with a larger diameter than the inner ring.
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
. The symbol comes on in the
. The symbol
again and again until
comes on in the display.
.
or .
Operating instructions
11
10
9
8
7
6
5
4
3
2
comes
1
0
1 2 3 4 5 6 7
, comes on. To deacti-
25
8 9