Zone 2 Installation And Operation - Boston Acoustics Avidea 770 Setup And User Manual

04
ADVANCED OPERATION
SECTION
. . .
. . .
From the Mode page, press the RF/IR button. A message will
ask you to select the Device you want to change. Press Next.
54
On the Device page, press Disc.
On the RF/IR page, select IR. Press Done.
Press and hold the Mode button again for 3 seconds. The Mode
screen appears.
From the Mode page, press the RF/IR button. A message will
ask you to select the Device you want to change. Press Next.
ADVANCED OPERATION
2
ZONE INSTALLATION AND OPERATION
On the Device page, press Tuner.
On the RF/IR page, select IR. Press Done.
Repeat these steps for the Devices found on the second Devices page: Listen Modes, Sleep Timer,
and Zone 2. Your Avidea Remote Control is now reconfigured to operate the Avidea system via IR.
The Avidea Remote Control will now only operate within the same room as the Avidea system, and
needs to be pointed in the same general direction as the location of the Control Center, with no
obstacles between the Remote Control and the Control Center.
The Avidea system has the ability to provide audio simultaneously and independently in two different
listening areas (Zones). With the connection of additional amplification and loudspeakers to the
Zone 2 output on the rear panel of the Avidea Control Center, you can, for instance, enjoy a movie
on DVD in the main room and music from a digital cable box in another room. A very popular
Zone 2 application is the use of weather-resistant speakers outdoors on a deck or patio area. We
highly recommend the use of Boston Voyager® outdoor speakers.
04
SECTION
. . .
. . .
55