sparkfun DEV-16829 Quick Start Manual page 15

CREATE NEW FORUM ACCOUNT
Resources and Going Further
Hopefully this guide has got you all set to get started with your own MicroMod logging project using the SparkFun
MicroMod Data Logging Carrier Board. For more information about the Carrier Board, check out the resources
below:
Schematic (PDF)
Eagle Files (ZIP)
Board Dimensions (PNG)
Hardware GitHub Repository
For more information on the MicroMod ecosystem, check out these resources:
Getting Started with MicroMod
Designing with MicroMod
MicroMod Info Page
MicroMod Forums
Not sure where to start with your own data logging project? The tutorials below may give you some ideas to get
the creative juices flowing:
GPS Logger Shield Hookup Guide
How to assemble and hookup the SparkFun GPS
Logger Shield. Never lose track of your Arduino again!
SparkFun gator:log Hookup Guide
The gator:log is a serial communication based data
logger. This tutorial will get you started using the
gator:log with the micro:bit platform.
LOG INTO SPARKFUN FORUMS
Hazardous Gas Monitor
Build a portable gas monitor to check for dangerous
levels of hazardous gases.
OpenLog Artemis Hookup Guide
How to use and re-program the OpenLog Artemis, an
open source datalogger. The OLA comes
preprogrammed to automatically log data with the built-
in ICM-20948 Inertial Measurement Unit (IMU) 9-
Degrees-Of-Freedom (9-DOF) sensor. The OLA can
also record serial data, analog voltages, or readings