Table of Contents
Advertisement
Operation
Assembly
A
B
C
The parts of the handle are locked together with the build-in spring loaded
buttons. Attach the tubes C to the handle A as shown above. If desired, the
handle can be lengthened by adding the extensions B.
Remove the plastic knobs (6), attach the handle and lock it in place with the
knobs.
Connecting the Battery
To prevent power loss or damage in transit, the battery is not connected and
turned around when the unit is delivered.
To connect the battery, loosen the screws, which hold the battery
compartment cover (4). Lift the battery cover and take the battery out of the
compartment. It is placed reversed in the compartment by the factory. Turn it
around and place it in the battery compartment in such a way that the battery
terminals engage in the connection clamps on the machine.
After that, close the battery compartment cover.
8
Advertisement
Table of Contents
