Page 2
Table of Contents Table of Contents Default chapter User Manual Getting Started with Accelerated View™ ................... 3 Local Device Management ......................6 Default Settings ..........................8 Configuration Examples Change Port 3 from WAN to LAN ....................9...
It is recommended that Accelerated View centrally manages the 6330-MX and 6335-MX routers; only resort to local management as necessary. For any questions regarding how to access Accelerated View, please contact support@accelerated.com...
Page 4
Using Remote Commands Using Remote Commands Accelerated View maintains a connection to all online client devices registered with the service. Using this "tunnel," network administrators can send a specific set of remote commands that will be received immediately as opposed to waiting to check in and apply any changes propagated from the cloud.
Page 5
Select the Check Configuration Check Configuration menu option to update a device immediately. Learning More Learning More Details on using Accelerated View can be found in the Accelerated View User’s Guide Accelerated View User’s Guide. . 6330-MX/6335-MX Page 5...
Local Device Management Local Device Management NOTE: NOTE: It is recommended that Accelerated View centrally manages the MX-series router. If you are not using the web based portal, you must manage and configure your device via the local interface.
Page 7
Defining a Custom APN Defining a Custom APN If your device is unable to sync with Accelerated View because the device cannot establish a cellular connection without a custom APN, it will need to be managed locally before remote configuration will be possible.
Accelerated View). Configuration Steps Configuration Steps Open the configuration profile for the 6330-MX and make the following changes. 1. Under Network -> Interfaces -> WAN Network -> Interfaces -> WAN , de-select the Enabled Enabled checkbox.
Page 10
User Manual 6330-MX/6335-MX Page 10 Page 10...