Yellowtec MIKA Studio Light Briefing Book page 38

m!ka Remarks
- Make sure that you use the correct screw size and length. Too long screws will
damage your flat panel!
Page 19
- You can deactivate the QuickFix function for security reasons. Turn in the screw next
to the release lever in order to disengage its function.
Page 20
- Insert the cable organizer clips into the bottom profile of the MMS Arm and turn it 90°
to fix it.
Page 21
- To secure a minimum vertical position of your monitor insert the MMS Safety Stop
Nut into the MMS pole. Use an Allen key and fasten it properly.
Page 22
- Use the Allen key of the thumbscrew for the height adjustment to de- or increase the
friction of the joints of your m!ka Monitor Arm
Page 23
- To secure proper upright positioning of the m!ka Bushing drill a hole with a mimum
diameter of 22 mm.
- The thread of the bushing is metric; should you ever need to replace the nut make
sure you use the correct M20x1,5 thread.
Page 24
- Use an Allen key to fix the MMS Pole Adapter properly.
- Use a Yellow Spacer with the MMS Pole Adapter.
38