Setting Audio Mode; Reset The Factory Setting; Scroll Caption Adjustments - Boss Audio Systems BV7995T User Manual

Basic Operation
Balance: R 0-10 to L 0-10 .
Adjust sound balance between left
and right speakers by using VOL + / -
-
Fader: F 0 10 to R 0 -10 .
Adjust sound balance between front and
rear speakers by using VOL + / VOL - .
Setting Audio Modes
Touch the screen the DSP range
DSP
(or press the EQ/LOUD button
on the remote ) to select one of
the preset sound modes .
(Rock/Pop/Jazz/Classic/Flat) .
The information will display in the
monitor as follow :
POP
FLAT
DVD 11-0:44:36
LUD SWF
SWF LUD
RDM INT
touch to select
It`s depend on your habit to select the Audio mode .
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
JAZZ
ROCK
CLASSIC
POP
DISC 11:08
TA AF
DSP CLK
RPT OSD
A. Initial installation of the unit when
all wiring is completed.
.
B. All the function buttons do not operate.
C. Error symbol on the display.
VOL
NOTE:
If RESET is selected, all memory data
will deleted, please re-adjust .
Scroll Caption Adjustment
In Radio mode:
You can adjust your desired scroll
caption , the method of the operation
as follow:
a). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar
will display on the screen .
b). Use the VOL+/- to select among of
the "A, B, C ....X, Y, Z, and blank ",
and use the
front panel to ahead/back (proceed/
cancel) , and then press the SETUP
button briefly to confirm .
(Press it button longer again to renew . )
18
RESET
/ button on the
FM1 106.30
MHz
ST DX TA
LUD SWF POP
DISC 11:08