Feit Electric GLP20/TABLE/37W/LED Important Safety Instructions And Installation Manual page 6

Ways to Grow (continued)
Hydroponic Growing Using
Grow Pods
1
Place the water tray (GG) on the base (DD).
2
Fill the water tray (GG) with water. Distilled or filtered water
is preferred.
3
Add the liquid nutrients according to the food bottle instructions.
4
Use the top hole tray (EE) to locate the pods.
5
Place the pods in the holes of the top
hole tray (EE). Not all 10 positions
need to be filled.
6
Use the seedling light setting until the plants have two sets of leaves.
Then switch to the vegetation light setting.
7
The water should be circulated daily to keep the nutrients dissolved.
8
Check the water level frequently.
9
Add liquid plant food every two weeks or as directed by instructions.
EE
Aerogarden is a trademark of AeroGrow International, Inc
®
Aerogarden Pods
®
Aerogarden Pods
®
Water level
GG
DD
Planting Seeds with
Peat Pellets and Soil
1
Place the water tray (GG) on the base (DD).
- The water tray (GG) will catch the
excess water. Let this water evaporate
or remove the water by unscrewing the drain
plug underneath the water tray (GG).
2
Place the soil tray (FF) on the water tray (GG).
3
Place the peat pellets into each opening of the
top hole tray (EE).
4
Place good soil around the peat pellets and fill the soil tray (FF)
to the top with applicable soil.
5
Use the top hole tray (EE) to hold the pellets, water the pellets
and to keep moisture inside the soil.
6
Press seeds into the top of the peat pellets according to the seed
pack instructions.
7
Use the seedling light setting.
8
Keep the seeds moist by watering every few days until the seeds
break the surface.
Seedling light should be used
until 2 sets of leaves have
formed above the surface.
FF
GG
6
Please contact 1-866-326-BULB (2852) for further assistance.
Dried pellet Hydrated pellet
Peat pellets
Soil level
EE
DD
WWW.FEIT.COM