Ways To Grow - Feit Electric GLP20/TABLE/37W/LED Important Safety Instructions And Installation Manual

Ways to Grow

Planting Seeds in Soil
1
Place the water tray (GG) on the base (DD).
- The water tray (GG) will catch the excess water.
Let this excess water evaporate or remove the water by
unscrewing the drain plug underneath the water tray (GG).
2
Place the soil tray (FF) on top of the water tray (GG).
3
Fill the soil tray (FF) to the top with applicable soil.
4
Use the top hole tray (EE) to space the seeds and locate
the watering spots. Press the seeds into the soil
following the seed packet directions.
5
Use the seedling light setting.
(refer to page 8 for grow light operation)
6
Keep the seeds moist by watering everyday for 2 weeks
or until the seeds break the surface.
Seedling light should be used
until 2 sets of leaves have
formed above the surface.
EE
FF
GG
DD
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | 1-866-326-BULB (2852) | FAX (562) 908-6360 | www.feit.com
Soil level
Plants in Soil
1
Place the water tray (GG) on the base (DD).
- The water tray (GG) will catch the excess water.
Let this excess water evaporate or remove the water by
unscrewing the drain plug underneath the water tray (GG).
2
Place the soil tray (FF) on top of the water tray (GG).
3
Fill the soil tray (FF) to the top with applicable soil.
4
Form a hole in the soil, insert a plant and cover the roots
with soil. Gently pat the soil down so that it is firm around
the roots.
5
Water the plant immediately.
6
Use the vegetation light setting for the vegetation stage.
The Vegetation light setting
can be used as the default
light setting. All plant stages
will grow under white light.
EE
FF
GG
DD
Soil level