Nokia NKC-1X Series Assembly And Disassembly Instructions page 3

CCS Technical Documentation
Disassembling the NKC-1X Basic Transceiver
1.
Hold the phone with the back facing you.
At the bottom of the phone, press the battery
cover with your thumb and forefinger.
2.
Place your other thumb on the
scoring, appr. one inch from the top of the
phone. Apply pressure with the thumb and
slide the back cover away from the bottom
end of the phone to release it, then remove it.
4.
Place your finger between the A- and
D-covers' snap feature.
Note! Do not use a screwdriver in this
phase, as it may leave marks on the
phone's mechanics.
5.
Lift the ATO module and remove the
A-cover.
Issue 1 02/03
Assembly and Disassembly Instructions
3.
Remove the screws from the bottom
end with specified tool.
Nokia Corporation
1.
4.
5.
NKC-1X
2.
Page 3