Nokia NKC-1X Series Assembly And Disassembly Instructions page 10

NKC-1X
Assembly and Disassembly Instructions
4.
Place one end of the battery latch
into the hole in the D-cover.
5.
Bend the latch and move the other
end into the hole in the D-cover.
7.
Place the buzzer assemble into its
place. Use tweezers.
Note! Make sure that the buzzer
springs stay intact.
Page 10
6.
The battery connector will be assembled
into the D-cover with interference fit.
Place connector into the D-cover with
tweezers.
Push the connector into the D-cover
slot with your fingers.
Note! Make sure that the battery
connector (white arrow) is below the
edges of the D-cover (black arrow)
after assembly.
Nokia Corporation
CCS Technical Documentation
4.
5.
Issue 1 02/03