CCS Technical Documentation
Troubleshooting - Global Positioning System (GPS) Engine
The RH-27 handset supports 800 Amps and 800 CDMA / 1900 CDMA + GPS with IS 2000
capability. The RH-27 engine supports CDMA and GPS functionality for Enhanced 911
(E911) services.
GPS circuitry utilizes RF signals from satellites stationed in geosynchronous orbit to
determine latitude and longitude of the handset. The GPS circuitry and the cellular
engine (CE) circuitry are completely separate in the handset. The GPS circuitry is located
almost exclusively on the secondary side of the PWB, underneath the display module.
GPS General Block Diagram
Filter
Filter
LNA
Xtal
16.368MHz
GPS RF Schematic
Filter 1 (Z001)
RF Input
Circuits located on Bottom Layer
Issue 1 11/2003
Confidential
IF = 4.092MHz
AGC
Amp
Synthesiser
GPS RF
Filter 2 (Z002)
Circuits located on Top Layer
©2003 Nokia Corporation
Troubleshooting - GPS
4
ADC
TRF5101
Cellular Baseband
GPS RF Chip (N001)
RH-27
Rx Data
Out
GPS
Baseband
Ref Clk
Page 3