CCS Technical Documentation
GPS RF Probing Setup
1 Turn on the GPS Receiver
2 Inject -25dBm tone @ 1575.52MHz at GPS Connector (X001) with signal gener-
ator or Call Box.
Signal Generator
Signal Generator
RF OUT
RF OUT
3 Continue to the GPS RF Probing Diagram diagram which follows, and measure
probe points with either a FET probe and a spectrum analyzer set at center fre-
quency 1575.25MHz, Span = 500kHz, or a voltmeter as specified.
Issue 1 11/2003
Confidential
©2003 Nokia Corporation
RH-27
Troubleshooting - GPS
Page 7