PAMS Technical Documentation
The main differences between these are:
•
FLASH programming voltage (Vpp) is produced a different way, and
•
Signal routings are different.
The fault-finding diagrams for flash programming are shown in Figure 2, Figure 3, and
Figure 4.
In cases of flash programming errors, the flash prommer can provide some information
about a fault. The fault information messages could be:
•
MCU doesn't boot
•
Serial clock line failure
•
Serial data line failure
•
External RAM fault
•
Algorithm file or alias ID don't find
•
MCU flash Vpp error
Issue 1 03/01
Nokia Mobile Phones Ltd.
NSB-5
Troubleshooting Instructions
Page 7